WillyFogg.com - Product Search Engine Select Country Worldwide     Select Language Español     Select Currency
Product Search Engine
Countries: 127
Languages: 120
Currencies: 62
Stores: 99,869
Manufacturers: 388,033
Products: 3,296,849



3-Axis Digital Gyroscope Module, L3GD20, I2C via UEXT, SPI Pins
3-Axis Digital Gyroscope Module, L3GD20, I2C via UEXT, SPI Pins
... outside world through a digital interface. The module provides I2C interface via a 2×5-pin UEXT connector, and a SPI interface via through-hole pads. The UEXT connector provides a solderless way ... . There are dozens of microcontroller systems and development boards that can connect to this module via UEXT using the supplied cable. Click on the architectures below for lists of compatible boards ...

3-Axis Digital Gyroscope Module, L3GD20, I2C via UEXT, SPI Pins
3-Axis Digital Gyroscope Module, L3GD20, I2C via UEXT, SPI Pins
... outside world through a digital interface. The module provides I2C interface via a 2×5-pin UEXT connector, and a SPI interface via through-hole pads. The UEXT connector provides a solderless way ... . There are dozens of microcontroller systems and development boards that can connect to this module via UEXT using the supplied cable. Click on the architectures below for lists of compatible boards ...

JTAGulator OCD Interface Board, 1.2-3.3V, USB, JTAG/UART, 24 ch.
JTAGulator OCD Interface Board, 1.2-3.3V, USB, JTAG/UART, 24 ch.
... is an open-source hardware tool that assists in identifying OCD connections from test points, vias, or component pads on a target device. It also could be used as a simple ... . Attach the target's points to the JTAGulator using the screw-in terminal blocks or via the 2×5 male headers, starting at CH0 and incrementing sequentially as needed. Ensure there is ...

JTAGulator OCD Interface Board, 1.2-3.3V, USB, JTAG/UART, 24 ch.
JTAGulator OCD Interface Board, 1.2-3.3V, USB, JTAG/UART, 24 ch.
... is an open-source hardware tool that assists in identifying OCD connections from test points, vias, or component pads on a target device. It also could be used as a simple ... . Attach the target's points to the JTAGulator using the screw-in terminal blocks or via the 2×5 male headers, starting at CH0 and incrementing sequentially as needed. Ensure there is ...

Serial 7-Segment Display 2 Board, LED, 2x4 Digits, SPI, IDC10
Serial 7-Segment Display 2 Board, LED, 2x4 Digits, SPI, IDC10
... 7-seg Display 2 Board features a MAX7219 serial input/output common-cathode display driver used to create an interface between MCUs and 7-segment numeric LED displays via SPI. The chip ... arranged as two rows of four digits each. Connection to a microcontroller system is achieved via a 2×5-pin female IDC10 connector at the end of the attached ribbon cable. DIP ...

LIN-to-UART Board, MCP201, LIN 2.1, IDC10 UART (LIN Board)
LIN-to-UART Board, MCP201, LIN 2.1, IDC10 UART (LIN Board)
... to 5V. This voltage can be used to power a device via another screw terminal. The board connects to the LIN via a third screw terminal. Jumpers are used to set Master/Slave mode and Normal/Alternate Slope mode. The board communicates with a microcontroller's UART via a 2×5-pin female connector at the end of an attached ribbon cable. DIP switches ...

Serial 7-Segment Display 2 Board, LED, 2x4 Digits, SPI, IDC10
Serial 7-Segment Display 2 Board, LED, 2x4 Digits, SPI, IDC10
... 7-seg Display 2 Board features a MAX7219 serial input/output common-cathode display driver used to create an interface between MCUs and 7-segment numeric LED displays via SPI. The chip ... arranged as two rows of four digits each. Connection to a microcontroller system is achieved via a 2×5-pin female IDC10 connector at the end of the attached ribbon cable. DIP ...

LIN-to-UART Board, MCP201, LIN 2.1, IDC10 UART (LIN Board)
LIN-to-UART Board, MCP201, LIN 2.1, IDC10 UART (LIN Board)
... to 5V. This voltage can be used to power a device via another screw terminal. The board connects to the LIN via a third screw terminal. Jumpers are used to set Master/Slave mode and Normal/Alternate Slope mode. The board communicates with a microcontroller's UART via a 2×5-pin female connector at the end of an attached ribbon cable. DIP switches ...

mikroExpert Visual GLCD 2 Kit - PIC: GUI Development S/W, Pascal
mikroExpert Visual GLCD 2 Kit - PIC: GUI Development S/W, Pascal
... supports both 3.3V and 5V microcontrollers. It can be powered over USB cable or via an external power supply (barrel connector or screw terminals). mikroProg The on-board mikroProg in ... When using a microcontroller that supports USB, you can connect the board to a PC via USB 2.0. mikroBUS sockets Three mikroBUS sockets allow you to use plug-and-play Click ...

mikroExpert Visual GLCD 2 Kit - PIC: GUI Development S/W, Pascal
mikroExpert Visual GLCD 2 Kit - PIC: GUI Development S/W, Pascal
... supports both 3.3V and 5V microcontrollers. It can be powered over USB cable or via an external power supply (barrel connector or screw terminals). mikroProg The on-board mikroProg in ... When using a microcontroller that supports USB, you can connect the board to a PC via USB 2.0. mikroBUS sockets Three mikroBUS sockets allow you to use plug-and-play Click ...

mikroExpert 2 Kit - PIC: DevBoard, PIC18F87K22, LCDs, Pascal IDE
mikroExpert 2 Kit - PIC: DevBoard, PIC18F87K22, LCDs, Pascal IDE
... supports both 3.3V and 5V microcontrollers. It can be powered over USB cable or via an external power supply (barrel connector or screw terminals). mikroProg The on-board mikroProg in ... When using a microcontroller that supports USB, you can connect the board to a PC via USB 2.0. mikroBUS sockets Three mikroBUS sockets allow you to use plug-and-play Click ...

mikroExpert 2 Kit - PIC: DevBoard, PIC18F87K22, LCDs, Pascal IDE
mikroExpert 2 Kit - PIC: DevBoard, PIC18F87K22, LCDs, Pascal IDE
... supports both 3.3V and 5V microcontrollers. It can be powered over USB cable or via an external power supply (barrel connector or screw terminals). mikroProg The on-board mikroProg in ... When using a microcontroller that supports USB, you can connect the board to a PC via USB 2.0. mikroBUS sockets Three mikroBUS sockets allow you to use plug-and-play Click ...

Battery Holder, 4x AA, 2.1mm Barrel Plug
Battery Holder, 4x AA, 2.1mm Barrel Plug
... provide 6V power to a portable device or small robot. The power output is available via a 2.1mm barrel plug, center positive. Batteries and mounting screws are not included.

Battery Holder, 4x AA, 2.1mm Barrel Plug
Battery Holder, 4x AA, 2.1mm Barrel Plug
... provide 6V power to a portable device or small robot. The power output is available via a 2.1mm barrel plug, center positive. Batteries and mounting screws are not included.

Deltaco speltangentbord, anti-ghosting, USB och PS/2, nordisk layout, svart/röd
Deltaco speltangentbord, anti-ghosting, USB och PS/2, nordisk layout, svart/röd
... tangenter med anti-ghosting. - Responstid upp till 8.33ms med PS/2. - Anti-ghosting, 13 tangenter via USB, 24 tangenter via PS/2. - 1,8m kabel. - Vikt 594g Mått (BxDxH): 452x170x30mm. Förpackingen innehåller: Tangentbord ...

Waspmote Main Board with 802.15.4 XBee PRO, 2 dBi Antenna
Waspmote Main Board with 802.15.4 XBee PRO, 2 dBi Antenna
... (DS3231SN) - Built-in temperature sensing: -40 to +85 °C with 0.25° accuracy (via DS3231SN) - Built-in accelerometer: ±2/±4/±8g @ 0.5Hz to 1kHz (LIS3331LDH) - Power consumption, On: 15mA - Power consumption ... the already wide range of mote responses. Sensor boards can be connected to the Waspmote via its 2×12- and 1×12-pin connectors, which allow communication of 16 digital input and ...

Waspmote Main Board with 802.15.4 XBee PRO, 2 dBi Antenna
Waspmote Main Board with 802.15.4 XBee PRO, 2 dBi Antenna
... (DS3231SN) - Built-in temperature sensing: -40 to +85 °C with 0.25° accuracy (via DS3231SN) - Built-in accelerometer: ±2/±4/±8g @ 0.5Hz to 1kHz (LIS3331LDH) - Power consumption, On: 15mA - Power consumption ... the already wide range of mote responses. Sensor boards can be connected to the Waspmote via its 2×12- and 1×12-pin connectors, which allow communication of 16 digital input and ...

Waspmote Main Board with DigiMesh XBee PRO, 2 dBi Antenna
Waspmote Main Board with DigiMesh XBee PRO, 2 dBi Antenna
... (DS3231SN) - Built-in temperature sensing: -40 to +85 °C with 0.25° accuracy (via DS3231SN) - Built-in accelerometer: ±2/±4/±8g @ 0.5Hz to 1kHz (LIS3331LDH) - Power consumption, On: 15mA - Power consumption ... the already wide range of mote responses. Sensor boards can be connected to the Waspmote via its 2×12- and 1×12-pin connectors, which allow communication of 16 digital input and ...